Manifold en acier inoxydable 3 circuits
Manifold en acier inoxydable 3 circuits est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Service de retrait disponible à Nordik Radiant
Habituellement prête en 24 heures
Garantie
Garantie
Ce produit est couvert par une garantie limitée de 3 ans
Expédition et Livraison
Expédition et Livraison
Les commandes sont expédiées dans un délai de 2 jours ouvrables. Si un problème nous empêche d'expédier votre commande dans ce délai, nous vous en informerons.
Selon votre lieu de livraison, le temps de transit variera de 1 jour à 5 jours.
Remarque pour les acheteurs américains et internationaux: Il incombe au client de payer au transporteur tous les coûts liés à l’importation, tels que les frais de douane, les taxes d'importation ou les frais de courtage/versement qui peuvent s'appliquer, et ce, au moment de la réception de la commande.
Manifold en acier inoxydable 3 circuits
Manifold en acier inoxydable 3 circuits est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Manifold en acier inoxydable 3 circuits
Manifold Nordik Radiant
Les manifolds Nordik Radiant en acier inoxydable ont été conçus en ayant en tête la durabilité, la performance et la facilité de contrôle. Ils permettent d’obtenir une température uniforme et facilitent le dépannage en cas de problème en étant équipé de plusieurs indicateurs.
- Valves d’isolation 1″ (entrée et sortie du manifold)
- Débitmètres sur chacun des circuits
- Purgeur d’air (aller et retour)
- Thermomètres (entrée et sortie du manifold)
- Raccords PEX 1/2″ inclus (possible de les remplacer en option par des raccords PEX 3/4″, “3/8″, ou 5/8”)
- Valves d’équilibrage sur chacun des circuits (remplaçable par des actuateurs)
- Support de montage mural
- Robinets de vidange (entrée et sortie du manifold)
Remarque : Les raccords à compression pour PEX 1/2" sont INCLUS. Peut également être utilisé avec des tuyaux de PEX 3/8'', 5/8'' et 3/4'' avec les raccords à compression vendu séparément
Les 8 positions de montage possibles
Dimensions
These manifolds are great quality.
Packaging and delivery excellent
Nordik is super speedy and has great customer service.
haven't installed the products yet but they look really nice.
Bon prix
This manifold's design and quality far exceeded my expectations. Price was reasonable too.
Well performing, accurate t'stats, complete with 1/2" connectors. Totally satisfied, will use again in the future!
Good quality products at a reasonable price. Fast shipping, very friendly and helpful customer service whether by phone or email. I will be buying from this company in the future. I highly recommend.
Good quality products at a reasonable price. Fast shipping, very friendly and helpful customer service whether by phone or email. I will be buying from this company in the future. I highly recommend.
Excellent produit qui remplit ses promesses
I purchased, some 3 and 4 loop manifolds. My next step is to install them permanently, I have set up 2 of the 3 manifolds in position #4 as per your recommended mounting positions. I am just about to complete my pex connections.
MY delema is that the boiler installer says the manifolds will leak at the flowmeters once operating.
I advise the boiler contractor that the manifolds were position as per Nordik recommendations.
Is there more probability of leaking if in position # 4 VS #6 ? .
Thanks in advanvce for your reply.
There is no issue installing your manifold in position 4 . The purge end caps can be rotated to allow the drain to face in the correct orientation. the manifold we sell have been tested in all of the position and it work fine in all of them .Also we been using the manifold and selling the manifold on many projects and our client have install them multiple of times in position 4 and we have not heard of any issue concerning leaking through the flow meter or any other parts when placed in position 4.
Composantes requises pour un système complet:
These manifolds are great quality.
Packaging and delivery excellent
Nordik is super speedy and has great customer service.
haven't installed the products yet but they look really nice.
Bon prix
This manifold's design and quality far exceeded my expectations. Price was reasonable too.
Well performing, accurate t'stats, complete with 1/2" connectors. Totally satisfied, will use again in the future!
Good quality products at a reasonable price. Fast shipping, very friendly and helpful customer service whether by phone or email. I will be buying from this company in the future. I highly recommend.
Good quality products at a reasonable price. Fast shipping, very friendly and helpful customer service whether by phone or email. I will be buying from this company in the future. I highly recommend.
Excellent produit qui remplit ses promesses
I purchased, some 3 and 4 loop manifolds. My next step is to install them permanently, I have set up 2 of the 3 manifolds in position #4 as per your recommended mounting positions. I am just about to complete my pex connections.
MY delema is that the boiler installer says the manifolds will leak at the flowmeters once operating.
I advise the boiler contractor that the manifolds were position as per Nordik recommendations.
Is there more probability of leaking if in position # 4 VS #6 ? .
Thanks in advanvce for your reply.
There is no issue installing your manifold in position 4 . The purge end caps can be rotated to allow the drain to face in the correct orientation. the manifold we sell have been tested in all of the position and it work fine in all of them .Also we been using the manifold and selling the manifold on many projects and our client have install them multiple of times in position 4 and we have not heard of any issue concerning leaking through the flow meter or any other parts when placed in position 4.
